diff --git a/AsbCloudApp/Data/ProcessMaps/ProcessMapPlanOperationReamingRotorDto.cs b/AsbCloudApp/Data/ProcessMaps/ProcessMapPlanOperationReamingRotorDto.cs
new file mode 100644
index 00000000..a29892da
--- /dev/null
+++ b/AsbCloudApp/Data/ProcessMaps/ProcessMapPlanOperationReamingRotorDto.cs
@@ -0,0 +1,210 @@
+using System.ComponentModel.DataAnnotations;
+using System.ComponentModel.DataAnnotations.Schema;
+
+namespace AsbCloudApp.Data.ProcessMaps;
+
+/// <summary>
+/// РТК план проработка для ротора
+/// </summary>
+public class ProcessMapPlanOperationReamingRotorDto : ProcessMapPlanBaseDto
+{
+    /// <summary>
+    /// Максимальное давление, атм
+    /// </summary>
+    [Range(0.0, 400.0)]
+    public double MaxPressure { get; set; }
+
+    /// <summary>
+    /// Перепад давления, атм.
+    /// </summary>
+    [Range(0.0, 60.0)]
+    public double DifferentialPressure { get; set; }
+
+    /// <summary>
+    /// Уставки, т., затяжка
+    /// </summary>
+    [Range(0.0, 20.0)]
+    public double SetpointsTight { get; set; }
+
+    /// <summary>
+    /// Уставки, т., посадка
+    /// </summary>
+    [Range(0.0, 20.0)]
+    public double SetpointsSlackingOff { get; set; }
+
+    /// <summary>
+    /// Максимально допустимый момент, кН*м.
+    /// </summary>
+    [Range(0.0, 35.0)]
+    public double MaxTorque { get; set; }
+
+    /// <summary>
+    /// Проработка 1, Количество повторений, шт.
+    /// </summary>
+    [Range(0.0, 99.0)]
+    public double Reaming1NumberOfRepetitions { get; set; }
+
+    /// <summary>
+    /// Проработка 1, Скорость, м/ч., Вверх
+    /// </summary>
+    [Range(0.0, 999.0)]
+    public double Reaming1ROPUp { get; set; }
+
+    /// <summary>
+    /// Проработка 1, Скорость, м/ч., Вниз
+    /// </summary>
+    [Range(0.0, 999.0)]
+    public double Reaming1ROPDown { get; set; }
+
+    /// <summary>
+    /// Проработка 1, Обороты, об/мин., Вверх
+    /// </summary>
+    [Range(0.0, 270.0)]
+    public double Reaming1RPMUp { get; set; }
+
+    /// <summary>
+    /// Проработка 1, Обороты, об/мин., Вниз
+    /// </summary>
+    [Range(0.0, 270.0)]
+    public double Reaming1RPMDown { get; set; }
+
+    /// <summary>
+    /// Проработка 1, Расход, л/с., Вверх
+    /// </summary>
+    [Range(0.0, 100.0)]
+    public double Reaming1FlowRateUp { get; set; }
+
+    /// <summary>
+    /// Проработка 1, Расход, л/с., Вниз
+    /// </summary>
+    [Range(0.0, 100.0)]
+    public double Reaming1FlowRateDown { get; set; }
+
+    /// <summary>
+    /// Проработка 1, Интервал проработки, м.
+    /// </summary>
+    [Range(0.0, 30.0)]
+    public double Reaming1Interval { get; set; }
+
+    /// <summary>
+    /// Остановка над забоем, м.
+    /// </summary>
+    [Range(0.0, 10.0)]
+    public double Reaming1StopPointOffBottom { get; set; }
+
+    /// <summary>
+    /// Проработка 2, Количество повторений, шт.
+    /// </summary>
+    [Range(0.0, 99.0)]
+    public double Reaming2NumberOfRepetitions { get; set; }
+
+    /// <summary>
+    /// Проработка 2, Скорость, м/ч., Вверх
+    /// </summary>
+    [Range(0.0, 999.0)]
+    public double Reaming2ROPUp { get; set; }
+
+    /// <summary>
+    /// Проработка 2, Скорость, м/ч., Вниз
+    /// </summary>
+    [Range(0.0, 999.0)]
+    public double Reaming2ROPDown { get; set; }
+
+    /// <summary>
+    /// Проработка 2, Обороты, об/мин., Вверх
+    /// </summary>
+    [Range(0.0, 270.0)]
+    public double Reaming2RPMUp { get; set; }
+
+    /// <summary>
+    /// Проработка 2, Обороты, об/мин., Вниз
+    /// </summary>
+    [Range(0.0, 270.0)]
+    public double Reaming2RPMDown { get; set; }
+
+    /// <summary>
+    /// Проработка 2, Расход, л/с., Вверх
+    /// </summary>
+    [Range(0.0, 100.0)]
+    public double Reaming2FlowRateUp { get; set; }
+
+    /// <summary>
+    /// Проработка 2, Расход, л/с., Вниз
+    /// </summary>
+    [Range(0.0, 100.0)]
+    public double Reaming2FlowRateDown { get; set; }
+
+    /// <summary>
+    /// Проработка 2, Интервал проработки, м.
+    /// </summary>
+    [Range(0.0, 30.0)]
+    public double Reaming2Interval { get; set; }
+
+    /// <summary>
+    /// Остановка над забоем, м.
+    /// </summary>
+    [Range(0.0, 10.0)]
+    public double Reaming2StopPointOffBottom { get; set; }
+
+    /// <summary>
+    /// Проработка 3, Количество повторений, шт.
+    /// </summary>
+    [Range(0.0, 99.0)]
+    public double Reaming3NumberOfRepetitions { get; set; }
+
+    /// <summary>
+    /// Проработка 3, Скорость, м/ч., Вверх
+    /// </summary>
+    [Range(0.0, 999.0)]
+    public double Reaming3ROPUp { get; set; }
+
+    /// <summary>
+    /// Проработка 3, Скорость, м/ч., Вниз
+    /// </summary>
+    [Range(0.0, 999.0)]
+    public double Reaming3ROPDown { get; set; }
+
+    /// <summary>
+    /// Проработка 3, Обороты, об/мин., Вверх
+    /// </summary>
+    [Range(0.0, 270.0)]
+    public double Reaming3RPMUp { get; set; }
+
+    /// <summary>
+    /// Проработка 3, Обороты, об/мин., Вниз
+    /// </summary>
+    [Range(0.0, 270.0)]
+    public double Reaming3RPMDown { get; set; }
+
+    /// <summary>
+    /// Проработка 3, Расход, л/с., Вверх
+    /// </summary>
+    [Range(0.0, 100.0)]
+    public double Reaming3FlowRateUp { get; set; }
+
+    /// <summary>
+    /// Проработка 3, Расход, л/с., Вниз
+    /// </summary>
+    [Range(0.0, 100.0)]
+    public double Reaming3FlowRateDown { get; set; }
+
+    /// <summary>
+    /// Проработка 3, Интервал проработки, м.
+    /// </summary>
+    [Range(0.0, 30.0)]
+    public double Reaming3Interval { get; set; }
+
+    /// <summary>
+    /// Остановка над забоем, м.
+    /// </summary>
+    [Range(0.0, 10.0)]
+    public double Reaming3StopPointOffBottom { get; set; }
+
+    /// <summary>
+    /// Примечание
+    /// </summary>
+    [StringLength(1024)]
+    public string Note { get; set; } = string.Empty;
+
+
+}
\ No newline at end of file
diff --git a/AsbCloudDb/Model/AsbCloudDbContext.cs b/AsbCloudDb/Model/AsbCloudDbContext.cs
index 19f46c52..87438528 100644
--- a/AsbCloudDb/Model/AsbCloudDbContext.cs
+++ b/AsbCloudDb/Model/AsbCloudDbContext.cs
@@ -22,6 +22,7 @@ namespace AsbCloudDb.Model
         public virtual DbSet<ProcessMapPlanRotor> ProcessMapPlanRotor => Set<ProcessMapPlanRotor>();
         public virtual DbSet<ProcessMapPlanSlide> ProcessMapPlanSlide => Set<ProcessMapPlanSlide>();
         public virtual DbSet<ProcessMapPlanReam> ProcessMapPlanReams => Set<ProcessMapPlanReam>();
+        public virtual DbSet<ProcessMapPlanOperationReamingRotor> ProcessMapPlanOperationReamingRotor => Set<ProcessMapPlanOperationReamingRotor>();
         public virtual DbSet<DrillingProgramPart> DrillingProgramParts => Set<DrillingProgramPart>();
         public virtual DbSet<FileCategory> FileCategories => Set<FileCategory>();
         public virtual DbSet<FileInfo> Files => Set<FileInfo>();
diff --git a/AsbCloudDb/Model/IAsbCloudDbContext.cs b/AsbCloudDb/Model/IAsbCloudDbContext.cs
index f21f8173..b34be878 100644
--- a/AsbCloudDb/Model/IAsbCloudDbContext.cs
+++ b/AsbCloudDb/Model/IAsbCloudDbContext.cs
@@ -81,6 +81,7 @@ namespace AsbCloudDb.Model
         DbSet<DataSaubStat> DataSaubStat { get; }
         DatabaseFacade Database { get; }
         DbSet<ProcessMapPlanReam> ProcessMapPlanReams { get; }
+        DbSet<ProcessMapPlanOperationReamingRotor> ProcessMapPlanOperationReamingRotor { get; }
 
         Task<int> RefreshMaterializedViewAsync(string mwName, CancellationToken token);
         Task<int> RefreshMaterializedViewAsync<TEntity>(CancellationToken token) where TEntity : class;
diff --git a/AsbCloudDb/Model/ProcessMapPlan/ProcessMapPlanOperationReamingRotor.cs b/AsbCloudDb/Model/ProcessMapPlan/ProcessMapPlanOperationReamingRotor.cs
new file mode 100644
index 00000000..21d97567
--- /dev/null
+++ b/AsbCloudDb/Model/ProcessMapPlan/ProcessMapPlanOperationReamingRotor.cs
@@ -0,0 +1,158 @@
+using System.ComponentModel.DataAnnotations;
+using System.ComponentModel.DataAnnotations.Schema;
+using AsbCloudDb.Model.ProcessMapPlan;
+using Microsoft.EntityFrameworkCore;
+
+namespace AsbCloudDb.Model.ProcessMaps;
+
+[Table("t_process_map_plan_operation_reaming_rotor"), Comment("РТК проработка ротор")]
+public class ProcessMapPlanOperationReamingRotor : ProcessMapPlanBase
+{
+    [Column("max_pressure"), Comment("Максимальное давление, атм")]
+    [Range(0.0, 400.0)]
+    [Required]
+    public double MaxPressure { get; set; }
+
+    [Column("differential_pressure"), Comment("Перепад давления, атм.")]
+    [Range(0.0, 60.0)]
+    [Required]
+    public double DifferentialPressure { get; set; }
+
+    [Column("setpoints_tight"), Comment("Уставки, т., затяжка")]
+    [Range(0.0, 20.0)]
+    [Required]
+    public double SetpointsTight { get; set; }
+
+    [Column("setpoints_slacking_off"), Comment("Уставки, т., посадка")]
+    [Range(0.0, 20.0)]
+    [Required]
+    public double SetpointsSlackingOff { get; set; }
+
+    [Column("max_torque"), Comment("Максимально допустимый момент, кН*м.")]
+    [Range(0.0, 35.0)]
+    [Required]
+    public double MaxTorque { get; set; }
+
+    [Column("reaming1_number_of_ repetitions"), Comment("Проработка 1, Количество повторений, шт.")]
+    [Range(0.0, 99.0)]
+    [Required]
+    public double Reaming1NumberOfRepetitions { get; set; }
+
+    [Column("reaming1_rop_up"), Comment("Проработка 1, Скорость, м/ч., Вверх")]
+    [Range(0.0, 999.0)]
+    [Required]
+    public double Reaming1ROPUp { get; set; }
+
+    [Column("reaming1_rop_down"), Comment("Проработка 1, Скорость, м/ч., Вниз")]
+    [Range(0.0, 999.0)]
+    [Required]
+    public double Reaming1ROPDown { get; set; }
+
+    [Column("reaming1_rpm_up"), Comment("Проработка 1, Обороты, об/мин., Вверх")]
+    [Range(0.0, 270.0)]
+    [Required]
+    public double Reaming1RPMUp { get; set; }
+
+    [Column("reaming1_rpm_down"), Comment("Проработка 1, Обороты, об/мин., Вниз")]
+    [Range(0.0, 270.0)]
+    [Required]
+    public double Reaming1RPMDown { get; set; }
+
+    [Column("reaming1_flow_rate_up"), Comment("Проработка 1, Расход, л/с., Вверх")]
+    [Range(0.0, 100.0)]
+    [Required]
+    public double Reaming1FlowRateUp { get; set; }
+
+    [Column("reaming1_flow_rate_down"), Comment("Проработка 1, Расход, л/с., Вниз")]
+    [Range(0.0, 100.0)]
+    [Required]
+    public double Reaming1FlowRateDown { get; set; }
+
+    [Column("reaming1_interval"), Comment("Проработка 1, Интервал проработки, м.")]
+    [Range(0.0, 30.0)]
+    [Required]
+    public double Reaming1Interval { get; set; }
+
+    [Column("reaming1_stop_point_off_bottom"), Comment("Остановка над забоем, м.")]
+    [Range(0.0, 10.0)]
+    [Required]
+    public double Reaming1StopPointOffBottom { get; set; }
+
+    [Column("reaming2_number_of_ repetitions"), Comment("Проработка 2, Количество повторений, шт.")]
+    [Range(0.0, 99.0)]
+    public double Reaming2NumberOfRepetitions { get; set; }
+
+    [Column("reaming2_rop_up"), Comment("Проработка 2, Скорость, м/ч., Вверх")]
+    [Range(0.0, 999.0)]
+    public double Reaming2ROPUp { get; set; }
+
+    [Column("reaming2_rop_down"), Comment("Проработка 2, Скорость, м/ч., Вниз")]
+    [Range(0.0, 999.0)]
+    public double Reaming2ROPDown { get; set; }
+
+    [Column("reaming2_rpm_up"), Comment("Проработка 2, Обороты, об/мин., Вверх")]
+    [Range(0.0, 270.0)]
+    public double Reaming2RPMUp { get; set; }
+
+    [Column("reaming2_rpm_down"), Comment("Проработка 2, Обороты, об/мин., Вниз")]
+    [Range(0.0, 270.0)]
+    public double Reaming2RPMDown { get; set; }
+
+    [Column("reaming2_flow_rate_up"), Comment("Проработка 2, Расход, л/с., Вверх")]
+    [Range(0.0, 100.0)]
+    public double Reaming2FlowRateUp { get; set; }
+
+    [Column("reaming2_flow_rate_down"), Comment("Проработка 2, Расход, л/с., Вниз")]
+    [Range(0.0, 100.0)]
+    public double Reaming2FlowRateDown { get; set; }
+
+    [Column("reaming2_interval"), Comment("Проработка 2, Интервал проработки, м.")]
+    [Range(0.0, 30.0)]
+    public double Reaming2Interval { get; set; }
+
+    [Column("reaming2_stop_point_off_bottom"), Comment("Остановка над забоем, м.")]
+    [Range(0.0, 10.0)]
+    public double Reaming2StopPointOffBottom { get; set; }
+
+    [Column("reaming3_number_of_ repetitions"), Comment("Проработка 3, Количество повторений, шт.")]
+    [Range(0.0, 99.0)]
+    public double Reaming3NumberOfRepetitions { get; set; }
+
+    [Column("reaming3_rop_up"), Comment("Проработка 3, Скорость, м/ч., Вверх")]
+    [Range(0.0, 999.0)]
+    public double Reaming3ROPUp { get; set; }
+
+    [Column("reaming3_rop_down"), Comment("Проработка 3, Скорость, м/ч., Вниз")]
+    [Range(0.0, 999.0)]
+    public double Reaming3ROPDown { get; set; }
+
+    [Column("reaming3_rpm_up"), Comment("Проработка 3, Обороты, об/мин., Вверх")]
+    [Range(0.0, 270.0)]
+    public double Reaming3RPMUp { get; set; }
+
+    [Column("reaming3_rpm_down"), Comment("Проработка 3, Обороты, об/мин., Вниз")]
+    [Range(0.0, 270.0)]
+    public double Reaming3RPMDown { get; set; }
+
+    [Column("reaming3_flow_rate_up"), Comment("Проработка 3, Расход, л/с., Вверх")]
+    [Range(0.0, 100.0)]
+    public double Reaming3FlowRateUp { get; set; }
+
+    [Column("reaming3_flow_rate_down"), Comment("Проработка 3, Расход, л/с., Вниз")]
+    [Range(0.0, 100.0)]
+    public double Reaming3FlowRateDown { get; set; }
+
+    [Column("reaming3_interval"), Comment("Проработка 3, Интервал проработки, м.")]
+    [Range(0.0, 30.0)]
+    public double Reaming3Interval { get; set; }
+
+    [Column("reaming3_stop_point_off_bottom"), Comment("Остановка над забоем, м.")]
+    [Range(0.0, 10.0)]
+    public double Reaming3StopPointOffBottom { get; set; }
+
+    [Column("note"), Comment("Примечание"), StringLength(1024)]
+    public string Note { get; set; } = string.Empty;
+
+    [ForeignKey(nameof(IdPrevious))]
+    public virtual ProcessMapPlanOperationReamingRotor? Previous { get; set; }
+}
\ No newline at end of file
diff --git a/AsbCloudInfrastructure/DependencyInjection.cs b/AsbCloudInfrastructure/DependencyInjection.cs
index 86ec923b..64d800b2 100644
--- a/AsbCloudInfrastructure/DependencyInjection.cs
+++ b/AsbCloudInfrastructure/DependencyInjection.cs
@@ -214,6 +214,10 @@ namespace AsbCloudInfrastructure
                 IChangeLogRepository<ProcessMapPlanReamDto, ProcessMapPlanBaseRequestWithWell>,
                 ProcessMapPlanBaseRepository<ProcessMapPlanReam, ProcessMapPlanReamDto>>();
 
+            services.AddTransient<
+                IChangeLogRepository<ProcessMapPlanOperationReamingRotorDto, ProcessMapPlanBaseRequestWithWell>,
+                ProcessMapPlanBaseRepository<ProcessMapPlanOperationReamingRotor, ProcessMapPlanOperationReamingRotorDto>>();
+
             services.AddTransient<IProcessMapReportDrillingService, ProcessMapReportDrillingService>();
 
             services.AddTransient<TrajectoryService>();
@@ -261,6 +265,7 @@ namespace AsbCloudInfrastructure
             services.AddTransient<IFileStorageRepository, FileStorageRepository>();
             services.AddTransient<IWellCompositeRepository, WellCompositeRepository<ProcessMapPlanRotorDto>>();
             services.AddTransient<IWellCompositeRepository, WellCompositeRepository<ProcessMapPlanSlideDto>>();
+            services.AddTransient<IWellCompositeRepository, WellCompositeRepository<ProcessMapPlanOperationReamingRotorDto>>();
             services.AddTransient<IUserRoleRepository, UserRoleRepository>();
             services.AddTransient<IUserRepository, UserRepository>();
             services.AddTransient<ILimitingParameterRepository, LimitingParameterRepository>();
@@ -317,6 +322,7 @@ namespace AsbCloudInfrastructure
             services.AddTransient<ProcessMapPlanRotorParser>();
             services.AddTransient<ProcessMapPlanSlideParser>();
             services.AddTransient<ProcessMapPlanReamParser>();
+            services.AddTransient<ProcessMapPlanOperationReamingRotorParser>();
 
             services.AddTransient<TrajectoryPlanExportService>();
             services.AddTransient<TrajectoryFactManualExportService>();
@@ -325,6 +331,7 @@ namespace AsbCloudInfrastructure
             services.AddTransient<ProcessMapPlanRotorExportService>();
             services.AddTransient<ProcessMapPlanSlideExportService>();
             services.AddTransient<ProcessMapPlanReamExportService>();
+            services.AddTransient<ProcessMapPlanOperationReamingRotorExportService>();
 
             services.AddTransient<WellOperationParserFactory>();
             services.AddTransient<WellOperationExportServiceFactory>();
diff --git a/AsbCloudInfrastructure/Services/ExcelServices/Templates/ProcessMapPlanTemplates/ProcessMapPlanOperationReamingRotorTemplate.cs b/AsbCloudInfrastructure/Services/ExcelServices/Templates/ProcessMapPlanTemplates/ProcessMapPlanOperationReamingRotorTemplate.cs
new file mode 100644
index 00000000..319e9fa8
--- /dev/null
+++ b/AsbCloudInfrastructure/Services/ExcelServices/Templates/ProcessMapPlanTemplates/ProcessMapPlanOperationReamingRotorTemplate.cs
@@ -0,0 +1,18 @@
+using System.Collections.Generic;
+using AsbCloudApp.Data.ProcessMaps;
+
+namespace AsbCloudInfrastructure.Services.ExcelServices.Templates.ProcessMapPlanTemplates;
+
+public class ProcessMapPlanOperationReamingRotorTemplate : ITemplateParameters
+{
+	public string SheetName => "Проработка ротор";
+
+	public int HeaderRowsCount => 2;
+
+	public string FileName => "ProcessMapPlanOperationReamingRotorTemplate.xlsx";
+
+	public IDictionary<string, Cell> Cells => new Dictionary<string, Cell>
+	{
+
+    };
+}
\ No newline at end of file
diff --git a/AsbCloudInfrastructure/Services/ProcessMapPlan/Export/ProcessMapPlanOperationReamingRotorExportService.cs b/AsbCloudInfrastructure/Services/ProcessMapPlan/Export/ProcessMapPlanOperationReamingRotorExportService.cs
new file mode 100644
index 00000000..1131e015
--- /dev/null
+++ b/AsbCloudInfrastructure/Services/ProcessMapPlan/Export/ProcessMapPlanOperationReamingRotorExportService.cs
@@ -0,0 +1,30 @@
+using AsbCloudApp.Data.ProcessMaps;
+using AsbCloudApp.Repositories;
+using AsbCloudApp.Requests;
+using AsbCloudApp.Requests.ExportOptions;
+using AsbCloudApp.Services;
+using AsbCloudInfrastructure.Services.ExcelServices.Templates;
+using AsbCloudInfrastructure.Services.ExcelServices.Templates.ProcessMapPlanTemplates;
+using System.Threading;
+using System.Threading.Tasks;
+
+namespace AsbCloudInfrastructure.Services.ProcessMapPlan.Export;
+
+public class ProcessMapPlanOperationReamingRotorExportService : ProcessMapPlanExportService<ProcessMapPlanOperationReamingRotorDto>
+{
+    public ProcessMapPlanOperationReamingRotorExportService(
+        IChangeLogRepository<ProcessMapPlanOperationReamingRotorDto, ProcessMapPlanBaseRequestWithWell> processMapPlanRepository,
+        IWellService wellService)
+        : base(processMapPlanRepository, wellService)
+    {
+    }
+
+    protected override ITemplateParameters TemplateParameters { get; } = new ProcessMapPlanOperationReamingRotorTemplate();
+
+    protected override async Task<string> BuildFileNameAsync(WellRelatedExportRequest options, CancellationToken token)
+    {
+        var caption = await wellService.GetWellCaptionByIdAsync(options.IdWell, token);
+
+        return $"{caption}_РТК_План_проработка_ротор.xlsx";
+    }
+}
\ No newline at end of file
diff --git a/AsbCloudInfrastructure/Services/ProcessMapPlan/Parser/ProcessMapPlanOperationReamingRotorParser.cs b/AsbCloudInfrastructure/Services/ProcessMapPlan/Parser/ProcessMapPlanOperationReamingRotorParser.cs
new file mode 100644
index 00000000..2f028b3b
--- /dev/null
+++ b/AsbCloudInfrastructure/Services/ProcessMapPlan/Parser/ProcessMapPlanOperationReamingRotorParser.cs
@@ -0,0 +1,42 @@
+using System;
+using System.Collections.Generic;
+using System.IO;
+using System.Linq;
+using AsbCloudApp.Data.ProcessMaps;
+using AsbCloudApp.Repositories;
+using AsbCloudInfrastructure.Services.ExcelServices.Templates;
+using AsbCloudInfrastructure.Services.ExcelServices.Templates.ProcessMapPlanTemplates;
+
+namespace AsbCloudInfrastructure.Services.ProcessMapPlan.Parser;
+
+public class ProcessMapPlanOperationReamingRotorParser : ProcessMapPlanParser<ProcessMapPlanOperationReamingRotorDto>
+{
+	public ProcessMapPlanOperationReamingRotorParser(IWellOperationRepository wellOperationRepository)
+		: base(wellOperationRepository)
+	{
+	}
+
+	protected override ITemplateParameters TemplateParameters => new ProcessMapPlanOperationReamingRotorTemplate();
+
+	protected override ProcessMapPlanOperationReamingRotorDto BuildDto(IDictionary<string, object?> row, int rowNumber)
+	{
+		var dto = base.BuildDto(row, rowNumber);
+
+		var section = sections.FirstOrDefault(s =>
+			string.Equals(s.Caption.Trim(), dto.Section?.Trim(), StringComparison.CurrentCultureIgnoreCase));
+
+		if (section is null)
+		{
+			var message = string.Format(XLExtentions.ProblemDetailsTemplate,
+				TemplateParameters.SheetName,
+				rowNumber,
+				TemplateParameters.Cells[nameof(ProcessMapPlanBaseDto.Section)],
+				"Указана некорректная секция");
+			throw new FileFormatException(message);
+		}
+
+		dto.IdWellSectionType = section.Id;
+
+		return dto;
+	}
+}
\ No newline at end of file
diff --git a/AsbCloudWebApi/Controllers/ProcessMaps/ProcessMapPlanOperationReamingRotorController.cs b/AsbCloudWebApi/Controllers/ProcessMaps/ProcessMapPlanOperationReamingRotorController.cs
new file mode 100644
index 00000000..01b6eebc
--- /dev/null
+++ b/AsbCloudWebApi/Controllers/ProcessMaps/ProcessMapPlanOperationReamingRotorController.cs
@@ -0,0 +1,28 @@
+using AsbCloudApp.Data.ProcessMaps;
+using AsbCloudApp.Repositories;
+using AsbCloudApp.Requests;
+using AsbCloudApp.Services;
+using AsbCloudDb.Model.ProcessMaps;
+using AsbCloudInfrastructure.Services.ProcessMapPlan.Export;
+using AsbCloudInfrastructure.Services.ProcessMapPlan.Parser;
+
+namespace AsbCloudWebApi.Controllers.ProcessMaps;
+
+/// <summary>
+/// РТК план проработка для ротора
+/// </summary>
+public class ProcessMapPlanOperationReamingRotorController : 
+    ProcessMapPlanBaseController<ProcessMapPlanSlide, ProcessMapPlanOperationReamingRotorDto>
+{
+    public ProcessMapPlanOperationReamingRotorController(
+        IChangeLogRepository<ProcessMapPlanOperationReamingRotorDto, ProcessMapPlanBaseRequestWithWell> repository,
+        IWellService wellService,
+        ProcessMapPlanOperationReamingRotorParser parserService,
+        ITelemetryService telemetryService,
+        ProcessMapPlanOperationReamingRotorExportService processMapPlanExportService)
+        : base(repository, wellService, parserService, processMapPlanExportService, telemetryService)
+    {
+    }
+
+    protected override string TemplateFileName => "ЕЦП_шаблон_файла_РТК_план_проработка_ротор.xlsx";
+}
\ No newline at end of file